Buttons¶
 | POWER |
|---|---|
| 1x press long | Starting device + tracking |
| Press twice briefly (from firmware V23.2.3) | Power saving mode with extended tracking intervals (>2 min GSM / 10 min Iridium) | .
| 3x pressing | Deactivate (requires network connection) |
| 1x press (on active charger) |
RESET |
 | MSG |
| 1x press long | PresetMsg#1 |
| 2x / 3x press quickly | PresetMsg#2/#3 |
 | TRACK |
| 1x press long | stop or restart Live-Tracking / SmartSafety |
| 2x press | PAUSE CheckIn (for SmartSafety) |
| Press 3 times (from firmware V 22.9.3) | Cycle through LED-Modes: Colorblindness (LEDs white instead of green) --> Dark/Silentmode (all Buzzer + LED off) --> Normal mode |
 | LIGHT/UPDATE |
| 2x press | ON / OFF |
| Press 3 times (from firmware V 22.2.3) | Switches immediately between cellular (GSM/4G) and satellite (Iridium) power saving mode: In satellite power saving mode, only searches for a GSM/4G network every 6 hours. Recommended for use at sea and in areas without any mobile network. |
| Long Press (only on activated charger and LED 4 (GSM) blinks green): Starts Firmware Update (all 4 LEDs glow permanently: LED 2-4 blue, LED1 first white, when the connection is successful green.) | |
 | SOS |
| 3x press | SOS starts |
| Alternatively: 1 long press |
Start SOS (only with "Tracker software revision": 0.54.1-RO or greater and with "Tracker firmware revision": 22.3.1 or greater) |
| Press 3x to cancel SOS or end all accuring alarms | |
| Alternatively: 1 long press |
Cancel SOS (only with "Tracker software revision": 0.54.1-RO or greater and with "Tracker firmware revision": 22.3.1 or greater) |